Designs by Jürgen Bestenlehner
as featured in FMT magazine
L.I.S.A. 200%
For Giant JUDI please scroll down

A new 200% Lisa
This is Jurgens' latest 200% sized Lisa incarnation
Read thru the RCGroups Thread to see build details
and how I got involved in this one
I am offering this kit as several options
Option 1: 3 sheets of MPF with all foam parts including Floats for $36 plus shipping.
Option 2: 2 sheets for KFM wing for another $24 plus shipping
Order EITHER option 2 OR option 3 not both.
Option 3: 2 sheets for Build up wing ( ribs included on Option already ) for another $24 plus shipping
Order EITHER option 2 OR option 3 not both.
Option 4: 1/8" thick Lite Ply pLywood parts another $14 plus shipping.
Option 5: 3D printed dummy Cylindar Heads for another $10 plus shipping.

As is turns out everything is more than one box so I will ship as a set of two boxes.
Builders must secure their own plans and building supplies.
This model only available in USA

FMT Magazine Plans are here
Proof of flight here
L.I.S.A. Original size ( 100%)

When Crunch-327 started this thread,
I was immediately drawn to the design.
After contacting Jürgen , he asked his Publisher if I
could do this kit and they agreed for the USA market only.
This Kit is cut from a full sheet of 3mm/1000/700 MPF
using a 1/16 dia bit for better details & sharp inside corners.
This is a Foam Parts Only Kit
Builders must secure their own plans and building supplies.
Shipping is in a 40"x19"x2" Box with Foam block stiffening
FMT Magazine Plans are here
Sample pix here
Proof of flight here

$20 Plus Shipping
This model only available in USA



Lisa WITH Floats
This Kit is cut from 1 1/2 full sheets of 3mm/1000/700 MPF
using a 1/16 dia bit for better details & sharp inside corners.
This is a Foam Parts Only Kit
Builders must secure their own plans and building supplies.
Shipping is in a 40"x19"x2" Box with Foam block stiffening
FMT Magazine Plans are here
Sample pix here
Proof of flight here

$30 Plus Shipping
This model only available in USA


Lisa Floats ONLY
This Kit is cut from 1/2 sheet of 3mm/1000/700 MPF
using a 1/16 dia bit for better details & sharp inside corners.
This is a Foam Parts Only Kit
Builders must secure their own plans and building supplies.
Shipping is in a 40"x19"x2" Box with Foam block stiffening
FMT Magazine Plans are here
Sample pix here
Proof of flight here

$10 Plus Shipping
This model only available in USA

JUDI Seajet 22" span

Shortly after our agreement on the LISA project.
Jürgen suggested that I take a look at his Judi Seajet design
It has a nice "STEP" and a good engine angle
for surface take offs, land or water.
With respect to Rusty-Gunn@rcg forums where this design was inspired
As with the LISA this kit will be for USA customers only.
Again, this is a Foam Parts Only Kit.
It is cut from an entire sheet of 3mm x 1000mm x 700mm MPF
Builders must secure their own plans and building supplies.
Shipping is in a 40"x19"x2" Box with Foam block stiffening
FMT Magazine Plans are here
Proof of flight here
More information and links on this site
$20 Plus Shipping
This model only available in USA

The Giant Judi Sea Jet is Here !!!
200% JUDI Sea jet 46" span



I have scaled UP the original
and made it 200% or 46" span
And it flys very nicely - video here
Plus dramatic ON THE WATER vid here
Here is a view From The Cockpit video
5 sheets ofMPF.
check out the layout here
It takes two boxes to pack it all up.

NEW LOWER PRICE
$75 Plus Shipping
This model only available in USA

JUDI Sea jet 32" span

I have scaled down the monster above and made it 32" span
And it also flys very nicely - video here
And an excellent Water operation video
2 FULL sheets of MPF.

$45 Plus Shipping
This model only available in USA

HOME
Indiana State weather
Aviation Weather
Custom Info
About Us
Shipping
Contact us
E-mail me at bob@hoosiercutoutservice.com
Created by HCS admin - all rights reserved - Nov 2013