Designs by Scott Swanson

A new 2/3 sized version of the SLOW BOAT


not actual pic

At the request of RCG members I have been asked
to offer a 2/3 sized Slow Boat,
designed by Scott Swanson.
This is a DIRECT CAD scaling by .67
and then had the slots and tabs adjusted.
Please see the next listing for Links to the RCG build thread
This kit includes 1 ea. sheet of CNC cut white MPF
Plus 4 LASER CUT ply Horns - $25 + Shipping
For Outside USA, Please read shipping policy

The original SLOW BOAT

At the request of some previous customers I have been asked
to cut the Slow Boat, by Scott Swanson.
Scott has graciously agreed to allow my services.
His build thread is here
with Free plans and build guides here ...
and here
two great videos here
This kit includes 3 sheets of 6mm white MPF
Plus LASER CUT Horns - $35 + Shipping
For Outside USA, Please read shipping policy

Here is a letter from a satisfied Slow Boat builder

Hi Scott and Bob,
Well it flies beautifully.
I flew SlowBoat twice yesterday and then quickly checked for heating of the ESC.
It was just warm so I don't think I have to worry much about it getting too hot.
Of course I will give it a chance to cool off between flights anyway.
I like to fly 8 to 10 minutes per flight and then sit for a little bit.
I pushed it bit harder yesterday to check the ESC.
My friend Pierre wants very much to make a video so if that turns out OK I will let you know.

I did a static test and it was pulling 144 Watts on the bench.
This made it jump off the grass and I was quickly pulling back on the throttle.
I did get the airplane a couple of ounces heavier with my modifications
and some decorating but I put the G of G about 1/4 inch behind the wing spar
which required a little lead weight in the nose.
My all up at take-off weight was 19.5 ounces.

Very satisfying,
Cheers, Grant.


NEW ! CL415 Water Bomber by Scott Swanson

Scott has a new Canadair CL415 Water Bomber
It's Large and Twin powered & actually Drops water.
His build log and video are here
This kit includes 6 sheets of 36mm white MPF
$70 + Shipping
For Outside USA, Please read shipping policy

This order pick has the Laser cut Ply parts & CF spar option.
His build log and video are here
This kit includes 6 sheets of 6mm white MPF
with Ply parts and 7mm round CF spar
$85 + Shipping
For Outside USA, Please read shipping policy

These are the 1/16" x 6" x 8" ply parts
They have the Scoop door & horns also on the card.
They are laser cut and are tabbed in the ply card.
$8 + Shipping
For Outside USA, Please read shipping policy

HOME
Indiana State weather
Aviation Weather
Custom Info
About Us
Shipping
Contact us
E-mail me at bob@hoosiercutoutservice.com
Created by HCS admin - all rights reserved - Nov 2013