50% designs can be cut from MOST full sized designs
It is simply a matter of using 1/2 sized Material( 3mm depron )
and 1/2 sized router bit and then setting the CNC machine to 50%
Some designs may be too dense or intricate to allow for this process
Here is what I've tried so far ...

F-14 Cut from 3mm Depron in White Depron


50% BD-5 White 20" span - $18

50% Sea Dart White
14.5" span - $18

50% F-15 White
13.4" span - $18

Indiana State weather
Aviation Weather
Custom Info
About Us
Contact us
This is my E-mail address bob@hoosiercutoutservice.com
Created by HCS admin - all rights reserved - Nov 2013