The Simple Cessna 310 was the brainchild of dz1sfb
and then further developed by by jeffsch , both from RCGroups.
Free plans are here
I got involved late in the thread by offering layouts of their Plans and parts
on the most available medium MFP sheeting.
After a series of corretions adn interations
I received a PM asking if I would cut the part for them.
Both dz1sfb and jeffsch have gratiously given me the OKy DOky.
What I am offering is two sheets of Foam parts cut from MPF.
It's my usual bare kit with Just the Foam parts & a set of Ply Horns.
Simple Cessna 310 $35 + S&H